Prototypes that behave like production parts.

We run the processes that matter for functional hardware, tune them for engineering materials, and finish every part before it leaves the studio.

Engineering FDM

Fused filament printing in enclosed printers, including an actively heated chamber so high-performance polymers like carbon-fiber nylon and polycarbonate print without warping or weak layers. It’s our workhorse for anything that carries load, sees heat or bolts to something else.

Best for brackets, motor and sensor mounts, enclosures, jigs and fixtures, and batch runs from 1 to 500 parts.

Build volume
up to 325 × 320 × 325 mm
Layer height
0.08 – 0.28 mm
Typical tolerance
± 0.2 mm or ± 0.2%
Minimum wall
0.8 mm

Precision resin (SLA)

Each layer is cured by light through a high-resolution mask, giving sharp edges, fine text and surfaces smooth enough to present. Engineering resins add toughness, flexibility or very high heat resistance, and a 16K printer handles the very finest surface detail.

Best for connector housings, small gears, optical and camera mounts, fluidic parts, and anything that has to look finished.

Build volume
up to 211 × 118 × 220 mm
XY resolution
down to 14 µm
Layer height
25 – 200 µm
Typical tolerance
± 0.1 mm or ± 0.15%
Minimum feature
0.3 mm

Multi-material

Two independent nozzles print two materials in one job: a rigid gripper finger with a soft TPU pad bonded in place, or an engineering part with water-soluble support filling internal channels that would otherwise be impossible to clean out. An automatic material system also switches spools mid-print for multi-color parts.

Combinations
Rigid + TPU, rigid + PVA
Soft grades
Shore 85A, 95A
Build volume
300 × 320 × 325 mm
Multi-color
Automatic spool changes

CNC machining

Desktop milling for parts that need metal stiffness, precise bores or a production surface finish. Aluminum brackets and plates, brass bushings, machined plastics, and isolation-milled circuit boards for prototype electronics.

Work area
200 × 200 × 100 mm
Metals
Aluminum, brass, copper
Plastics and boards
Acrylic, PC, POM, FR-4
Tolerance
0.02 mm

Laser cutting and engraving

Fast 2D parts: plywood fixtures, acrylic covers, gaskets and templates. We also engrave serial numbers, labels and logos onto finished parts, including 3D-printed parts, anodized aluminum and bare metals such as stainless steel.

Working area
426 × 312 mm
Cutting thickness
up to 15 mm plywood
Acrylic
Black and colored, up to 11 mm
Engraving
Wood, acrylic, leather, anodized aluminum, stainless steel

Vacuum forming

A heated plastic sheet is pulled tight over a mold, often one we print or machine for you. Thin-wall covers, trays, packaging inserts, clear guards and short-run enclosures, made in minutes per part.

Forming area
280 × 200 mm
Draw depth
up to 200 mm
Sheet thickness
0.2 – 3.0 mm
Sheets
HIPS, PETG, ABS, PC, Kydex

3D scanning and reverse engineering

We scan existing parts into 3D models, so you can replace a discontinued component, design a mount around something that already exists, or check a finished part against its CAD.

Accuracy
up to 0.02 mm
Object size
5 mm to 1 m
Output
Mesh (STL, OBJ) for CAD

Finishing and secondary operations

Parts arrive ready to assemble. We install heat-set threaded inserts, tap holes, remove supports, sand blast for an even matte finish, and sand and prime cosmetic surfaces.

Threaded inserts
M2 – M6, brass
Tapped threads
M2 – M8, 1/4-20
Surface
As printed, sand blasted, sanded, primed

Design review by an engineer, on every order.

Before anything prints, an engineer looks at your part the way you would. If something will fail, warp or cost more than it should, you hear about it first, with a suggested fix.

  • Orientation for strength

    Layers are weakest in tension across them. We orient parts so the load runs along the layers, and tell you when that conflicts with surface finish.

  • Walls, bosses and holes

    Thin walls, undersized bosses for inserts, and holes that will print undersized are flagged with recommended dimensions.

  • Tolerances and fits

    Press fits, bearings and mating parts get compensated clearances based on the material and process.

  • Cost and time

    Small changes, like a chamfer instead of an overhang, can cut support material and print time. We point them out.

Design guidelines.

Rules of thumb for parts that print right the first time. Your engineer review will confirm specifics for your geometry.

FeatureEngineering FDMPrecision resin
Minimum wall thickness0.8 mm (1.2 mm for load-bearing)0.6 mm supported, 1.0 mm unsupported
Minimum hole diameter2.0 mm0.5 mm
Clearance between moving parts0.4 mm0.25 mm
Embossed and engraved text0.6 mm deep, 1.0 mm stroke0.3 mm deep, 0.4 mm stroke
Self-supporting overhang45° from vertical30° from vertical
Boss for M3 heat-set insert4.0 mm hole, 2.0 mm wall around itUse tapped hole instead
Accepted filesSTL, OBJ, 3MF, STEP, IGES, Parasolid, SolidWorks, Fusion 360, with a PDF drawing for critical dimensions

Coming to the studio.

Next on our equipment roadmap: a high-temperature printer for PEEK and PEI.

Coming soon

High-temperature printing

PEEK and PEI (ULTEM™ class) for aerospace, medical and chemical-resistant parts that ordinary engineering polymers can’t survive.

Materials
PEEK, PEI
Hotend
400 °C and above

Not sure which process fits?

Send the file anyway. The engineer review will recommend a process and material, with the trade-offs spelled out. The instant estimator prices 3D printing; CNC machining, laser cutting, vacuum forming and scanning jobs are quoted by an engineer.

Start an estimate